 |
| 标准手机通用充电器 |
公司目前已进入自主开发阶段，开发出一系列以电子、塑胶为主的新特网络通讯设备，请国内（特别是广东、深圳本地）相关配件厂家提供相关配件，尽快与我们取得联系（Email:join2@126.com),成为我们的配件供应商 Company is now in its development phase, to develop a series of electronic, plastic-based new special network communications equipment, please domestic (especially Guangdong, Shenzhen local) related accessories manufacturers provide related accessories, as soon as we made contact with (Email:join2@126.com), a supplier of our accessories
|
|
参数说明 型号 :LTD-0902 USB 系列 开关型插墙式充电器
壳体尺寸(长*宽*高):60*26.5*42.5mm
成品净重:38.5g
工作温度:0~40℃
存储温度:-40~70℃
存储湿度:10-90%
EMC:FCC part15(CLASS B)
安全许可:CCC SAFE
额定输入电压:90~264VAC
平均效率:≥50%
1、输入:
1-1.输入电压 :90~264VAC
1-2.输入频率 :47~63 Hz
1-3.输入电流 :≤150mA
2、输出:
2-1.输出电压 :+5.4VDC
2-2.电压精度 :+5.4 V±0.4VDC
2-3.输出电流 :500mA DC
2-4.电流精度 :500mA±50ma DC
3、保护装置:
3-1.过流保护 :≤950mA
3-2.过压保护 :6.2V MAX
4、环境
4-1.工作温度 :0~40 ℃
4-2.工作湿度 :10~90%
4-3.存储温度 :-40~70 ℃
4-4.存储湿度 :5~95%
5、 高压测试及泄漏电流:
5-1.输入到输出部分 :3KV 10mA 1sec
5-2.泄漏电流 :≤0.25mA
5-3.绝缘阻抗 :≥50MΩ,500VDC
6、安全及电磁兼容
6-1.安全标准 :CCC SAFE
6-2.电磁兼容标准 :FCC Part 15(CLASS B)
|
|
|
|
|
|
创新产品-塑胶工模水嘴，以特殊工程材料完全代替铜管注塑工模冷却水嘴，其韧度和耐用度则远远高于传统铜管注塑工模冷却水嘴，而价格只是铜管注塑工模冷却水嘴的一半，而且不再需要使用防水胶布，本产品由我公司工程技术部独立开发，现已申报中国国家专利产品的过程中，并率先投放市场，欢迎相关业者捷足先登前来洽谈订购
Innovative products - plastic mould Shuizui to special engineering materials fully replace brass cast mould cooling Shuizui its consistency and durability degrees is far higher than traditional brass cast mould cooling Shuizui, and the price is only brass cast mould cooling Shuizui half, but no longer need to use waterproof tape, the products from our company engineering department independent development, Chinese patent products now declare the process, and to put on the market, welcomed the relevant operators to discuss their marks ordered |
|
|
|
|
|
|
|
|
